Onboard Control Panel Menus - Martin Stagebar 2 RGBAW User Manual

Onboard control panel menus

Default settings are shown in bold print
All temperatures are displayed in both °C and °F
Menu
ADDRESS
DMX MODE
STAND ALONE
ADJUSTMENT
PERSONALITY
Options
1 -
X
HSI
HSIC
control mode
RGB
RGBAW
1
2
pixel grouping
3
all
on
pixel invert
off
stand alone off
static colour
sa setup
sa: rgb fade
sa: rgbaw fade
sa: pastel fade
red
green
blue
amber
white
intensity
backlight
delay
Onboard control panel menus
Notes
Set the fixture's DMX address using up and
down buttons (where X is the last useable
address depending on the mode the fixture is
set to)
HSI color control
HSIC color control
RGB color control
RGBAW color control
Individual control of pixels
Pixels controlled in 3 groups of 2 pixels
Pixels controlled in 2 groups of 3 pixels
Pixels controlled in 1 group of 6 pixels
(control all pixels at same time)
Pixels swapped left to right (1 moved to 6, 2
moved to 5, etc.)
Pixels normal
Disable stand-alone operation
Enable static color display – select display
intensity from 0 - 255 for white, amber, blue,
green and/or red
Select slow, medium or fast RGB sequence
Select slow, medium or fast RGBAW sequence
Select slow, medium or fast pastel colors
sequence
Manually set red intensity
Manually set green intensity
Manually set blue intensity
Manually set amber intensity
Manually set white intensity
Set display backlight intensity to high, medium
or low
Set time before display backlight goes into sleep
mode to 15 secs., 30 secs. or 2 mins.
23