To hang luminaire in truss:
Step 1. Lift luminaire into mounting position.
Step 2. Secure in place with truss hooks. Ensure truss hook hardware that locks
Step 3. Attach safety cable (as required) as follows:
Step 4. Connect power and data cables according to procedure given in
Safety Cable:
Recommended for all
hanging installations.
May be required by
local codes.
34.5"
(87.6cm)
Figure 2-7: Example Luminaire Truss Hanging Installation
02.9 663.00 01 B
hook in place (e.g. wing bolt) is properly tightened and that luminaire is fully
supported.
a. Connect end of cable to mounting pin at one side of pan tube base.
b. Loop at least once around pipe and attach other end at second mounting
pin.
Data and Power" on page
17.5"
(44.5cm)
I
: I
NSTALLATION
NSTALLATION
24.
26"
(66cm)
11-Jun-02
P
ROCEDURES
"Connecting
26.5"
(67.3cm)
2
21