Menu Functions; Menu Controls - Vari Lite VL1600 Profile User Manual

VL1600 ProfiLe
4
OPeraTIOn

MENU FUNCTIONS

Press the MENU button to select any functions, until the required function is shown in the display. Select the
LCD Display and Menu System
The VL1600 Profile LCD Display and Menu System provides local control for accessing the
following fixture's settings:
• Address – to set the DMX address
• Configure – various parameter settings, set luminaire ID
• DMX – change the map, view incoming DMX, invert pan/tilt
• Fixture – fixture status, recalibrate, reboot, software version, view fixtures hours, service, etc.
• Manual – manual control of parameters
• Test – test functions of parameters
The menu system is controlled at the Menu Display available at the enclosure input panel. If there are multiple
luminaires in a system, any settings or changes would need to be made at each LCD Menu as desired

MENU CONTROLS

The menu system is controlled by an OK (Enter), ESC (Escape), and four Arrow (◄▲▼►) buttons.
OK
OK (Enter) Button
To Select or Change a
Setting or Data Value
ESC
ESC (Escape)
Used to Access Main Menu Parameters,
Exit, or Return to Previous Menu Item
Arrow Keys (Up/Down/Left/Right)
Menu Navigation / Data Selection
30
user manuaL
LCD Display
Displays all Data and
Luminaire Settings
w w w.Va r i - L i t e .c o m