To hang arc ballast in truss:
Step 1. Lift ballast into mounting position.
Step 2. Secure in place with truss hook. Ensure truss hook hardware that locks hook
Step 3. Attach safety cable (as required) as follows:
02.9 663.00 01 B
in place (e.g. wing bolt) is properly tightened and that ballast is fully sup-
ported.
a. Connect end of cable to attachment point at one side of ballast.
b. Loop at least once around pipe and attach other end at second point.
4.54"
(11.5 cm)
13.43"
(34.1 cm)
11.56"
(29.4 cm)
11-Jun-02
I
: I
NSTALLATION
NSTALLATION
P
ROCEDURES
Safety Cable:
Recommended for all
hanging installations.
May be required by
local codes.
2
23