Vari Lite VL1000 User Manual page 81

WARNING: Backcap and adjustment knobs will be HOT during lamp operation.
Wear gloves and/or use tools to prevent burns.
To run tests:
Step 1. Press [Menu].
Step 2. Press [Up] / [Down] arrows until Test appears. Press [Enter].
Step 3. Use [Up] / [Down] arrows to select a parameter to test. Refer to
Step 4. Press [Enter] to run test.
Step 5. Press [Menu] to stop test at any time.
02.9 663.00 01 B
System Function Chart" on page 57
which can be chosen.
11-Jun-02
M S : S
ENU YSTEM ELF
for a complete list of test parameters
4
T
ESTS
"Menu
63