Accessory Frame Holder - Vari Lite VL1000 User Manual

Accessory Frame Holder

An accessory frame holder is provided for the addition of a top hat or gel frame with
silks, frosts or color correction if required. The frame holder is designed to fit a
standard 8-inch gel frame or top hat.
To remove and replace frame or top hat:
Step 1. Disconnect luminaire AC input cable from power source.
Step 2. At front lens, press upward on accessory frame latch and turn to open.
Step 3. Remove frame/top hat, if any
Step 4. Install frame/top hat and close latch.
Latch
Head Assembly
02.9 663.00 01 B
I
Press Up
and Turn
NOTE:
The accessory frame is not a Vari-Lite accessory.
Figure 2-5: Installing a Frame or Top Hat
11-Jun-02
: I
NSTALLATION NSTALLATION
(Figure 2-5).
2
P
ROCEDURES
Gel, Silk, or
Frost
Accessory Frame
19