VARI LITE® - VL1000™ ERS L
Step 3. At backcap, flip two bail clamps outward
Step 4. Flip two base clamps outward away from socket.
Step 5. Grip lamp by base and firmly install in socket.
Step 6. Close base and bail clamps, locking into place.
1
Flip bail clamps outward.
Socket
3
Step 7. Re-install backcap, ensuring that alignment studs and holes are aligned
Step 8. Align lamp. (Refer to
16
U
UMINAIRE
SER
Bail Clamps
Close base clamps.
Figure 2-2: Installing Incandescent Lamp in Socket
(Figure
2-1).
page
28.)
'
M
S
ANUAL
(Figure
2
Flip base clamps outward.
Install lamp, firmly pressing into place.
Lamp
4
Close bail clamps.
"Align Lamp For Maximum Beam Irradiance" on
11-Jun-02
2-2).
Do not touch lamp
with bare fingers.
CAUTION:
Base Clamps
02. 9663.0 001 B