Connecting Data And Power - Vari Lite VL1000 User Manual

VARI LITE® - VL1000™ ERS L

Connecting Data and Power

A maximum of 32 luminaires may be connected in any one DMX data link.
Note: This maximum limit applies to the luminaire "daisy chain" only. Your system
or console may require fewer luminaires on a single data link path. Consult your
console documentation for more information.
To connect power and data:
Step 1. Connect data cable from console to first luminaire in chain at DATA IN con-
Step 2. If required, connect additional data cables from DATA THRU connectors to
Step 3. At last luminaire in link, install male termination connector at DATA THRU
from console
Step 4. Connect AC Input Cable connector to power input source.
Step 5. Connect Lamp Power Input Cable to external ballast (arc models) or dimmer
Step 6. Dress cables and secure them so that they will not interfere with luminaire
24
U
UMINAIRE SER
nector.
DATA IN connectors of remaining luminaires in link.
connector. (Luminaires and other devices on the same DMX chain may not
function properly without termination.)
Data Thru
Data In
(incandescent models).
head and yoke movement.
11-Jun-02
' M
S ANUAL
Data Thru
Termination
02. 9663.0 001 B