Livestrong LS13.0T Owner's Manual page 16

LS13.0T & LS15.0T ASSEMBLY STEP 6
LS 13.0 T
LS 15.0 T
CONSOLE MAST
BASE FRAME COVER
BOLTS (G)
SCREW (H)
16
HARDWARE FOR STEP 6 :
BOLT (G) SCREW (H)
12 mm 25 mm
Qty: 6 Qty: 2
BASE FRAME FOOT LATCH
*This step is for LS13.0T & LS15.0T models only.
Fold the deck into the upright position until the
A
foot latch engages.
Open HARDWARE FOR STEP 6.
B
Attach BASE FRAME COVER to CONSOLE
C
MAST using 1 SCREW (H) from the side.
Attach BASE FRAME COVER to BASE
D
FRAME using 3 BOLTS (G) from above.
Repeat on other side.
E
While holding the deck with both hands, press
F
the foot latch with your foot to lower the deck
to the ground.
LS13.0T & LS15.0T
ASSEMBLY COMPLETE!
Before the first use, lubricate the treadmill deck by
following the instructions in the MAINTENANCE
section in the TREADMILL GUIDE.