Livestrong LS13.0T Owner's Manual page 12

ASSEMBLY STEP 2 (continued)
LEAD WIRE
ALL
MODELS
RIGHT CONSOLE MAST
CONSOLE CABLE
LEFT CONSOLE MAST
BOLTS (A)
12
D Pull the CONSOLE CABLE out of the treadmill base
frame using the LEAD WIRE. Attach CONSOLE
CABLE to the CONSOLE CABLE in the bottom of
the mast. The other end of the CONSOLE CABLE
should be located at the top of the mast. Detach and
discard LEAD WIRES.
E Align the RIGHT CONSOLE MAST so that BOLT
(A) sits in the NOTCHED HOLE in the bottom of the
CONSOLE MAST.
NOTE: Be careful not to pinch the console
NOTCHED HOLE
cable while attaching the right console mast.
F Attach CONSOLE MAST to MAIN FRAME
BRACKET using 4 FLAT WASHERS (B), 4 SPRING
WASHERS (C) and 4 BOLTS (A).