UPS Messages reference table
Explanation
Initialization
No export
At bypass
Rectifier working
Battery mode
Battery testing
Starting
ECO mode
EPO mode
UPS maintaining
UPS fault
Battery float charging
Battery Boost charging
Inverter on/off
Master of UPS
Maintenance switch close or open
1.5.3 Display instruction
1)
The main interface below comes out when the power is connected or the system is
cold start. See Fig1
Fig.1 Main interface
2)
Press any key, it will change to the basic status interface , see Fig2 below
Fig.2 Basic status interface
Content
CurState: Init
No-Out
Bypass
Mains
Battery
Testing
Starting
CurState : ECO
CurState: EPO
CurState: M-Byp
CurState:Fault
Battery Charging
Battery Boost
Invter ON/ Invter OFF
Inver Master
SWMB ON/ SWMB OFF