Appendix 6 Lbs Port Definition; Appendix 7 Repo Instruction - KStar HIP3300E Operation Manual

Connection between the Device's RS485 port and UPS COM port.
device(RJ45)
Pin 1/5
Pin 2/4
Available function of RS485
RS485 communication data format
Definition of port:
Connection between the UPS LBS port.
UPS(RJ45)
Pin 1/2/3
Pin 5/7/8
Available function of LBS
◆The output power of two or more UPS in non-parallel system should be synchronized with each other.
◆The output phase of two or more UPS in non-parallel system should be synchronized with each other.
CAUTION!
Two or more LBS cables must be used to form a ring when two or more LBS in
non-parallel system. And the cables must use horizontal line.
UPS(RJ45)
Pin 1/5
Pin 2/4
◆ communicate to battery monitor
Baud rate ---------- 9600bps
Byte length ---------- 8bit
End bit ---------- 1bit
Parity check ---------none

Appendix 6 LBS port definition

UPS(RJ45)
Pin 1/2/3
Pin 5/7/8

Appendix 7 REPO instruction

Description
485+ "A"
485 - "B"
Description
LBS
GND
76