Extron electronics AXP 64 C AT Setup Manual page 4

AXP 64 C AT • Setup Guide (Continued)
On the Dante Controller web page, click Download (
3.
On the Download Center page, follow the prompts to download the Dante Controller installer file.
4.
If the Download Center page has closed, click the Download tab again to access the left sidebar.
5.
On the left sidebar, click DSP Configurator Software.
6.
On the DSP Configurator web page, click the Download button.
7.
The Download Center page is displayed again.
Follow the prompts to download DSP Configurator.
8.
If you have saved either or both software files, install them when ready.
9.
The installed Dante Controller program files are saved in
C:\Program Files (x86)\Audinate\Dante Controller\DanteController.exe.
The installed DSP Configurator program files are saved in C:\Program Files (x86)\Extron\DSP Configurator.
NOTE:
On the first installation of DSP Configurator, a USB driver automatically loads.
Follow the on-screen instructions. After the USB driver loads, installation continues.
4
).
1