Length Control (Paper Length Control) - Panasonic KV-S7065C Reference Manual

3.28 Length Control (paper length control)

When the Length Control function is selected, the scanner scans the documents in
the size that corresponds to their length.
If, for instance, Length Control is set to off when A4 and A5 width documents are to
be scanned continuously, the documents with the A5 width will also be scanned in
the A4 size, and the roller will be scanned for the parts corresponding to their bottom
halves. Conversely, if Length Control is set to on and some A4 documents and some
A5 width documents are scanned in the same session, the A4 documents will be
scanned in the A4 size and the A5 width documents will be scanned in the A5 length
size, and no memory will be wasted.
IMPORTANT NOTE:
• With the TWAIN driver, the Length Control function may not be supported
depending on the application. In a case like this, the check box will be grayed out
or the scanned images will retain their original length.
Original document Length Control off
86
S7065C SS905C
Length Control on