Panasonic KV-S7065C Reference Manual page 26

TWAIN configuration method
1 In the [Paper Source] list box in the [TWAIN] dialog box, select ADF Simplex,
ADF Duplex or Flatbed (
2 Click the [Feed] tab, and then in the [Page] section click [All Pages] button or
the [Number Of Pages] button to select the number of pages to be scanned.
When the [All Pages] button is clicked, all the pages of the installed document
will be scanned.
When the [Number Of Pages] button is selected, the number of pages to be
scanned can be set. To scan an image (Front side and Back side) on one sheet
in the Duplex scanning mode, input the number "2" in the [Number Of Pages]
edit box.
IMPORTANT NOTE:
• If ADF Duplex is not displayed in the [Paper Source] list box or even if scanning is
performed after it has been selected, the image on only one page may be
displayed. This occurs because the application or scanner used does not support
duplex scanning.
only).
S7065C
26