5. Scanning Instructions
This section describes the basic procedure to be followed in order to start scanning.
For more details, refer to the operating instructions of the application concerned.
With ISIS (when PixUtil is used)
1 First, set the scanning conditions. (Refer to
2 Select [Scan Batch to File...] on the [File] menu. The [Scanned Document
3 Select the drive in which the file is to be created in the [Drives] list box, and
4 Specify the filename in the [File Name] edit box.
5 Specify the file type from the [List Files of Type] list box.
6 Set either the [Multi-page file] or [Use Naming Schema] check box to on.
Method in
3.)
Name] dialog box now appears.
select the folder in the [Directories] box.
[Multi-page file] is used when all the images are to be stored in one file. (It
cannot be used with some file types.)
[Use Naming Schema] is used when each image is to be stored in a separate
file.
Functions and Configuration
146