ISIS configuration method
1 Set the main scanning conditions for the front and back sides.
3.3)
Click the [Sub Area...] button in the [ISIS] dialog box to display the [Sub Area]
dialog box.
2 In the [Select Setting Side] section, set the scanning side of the sub area to be
set and the [Region] number.
3 Set the [Enable] check box to on.
4 In the [Dither] list box, select the sub area's Halftone (dither) pattern.
5 Specify the sub area position in the [Area] section.
6 If necessary, set the next sub area by setting next [Region] number.
40
(Paper Source in