Resolution (Dots Per Inch) - Panasonic KV-S7065C Reference Manual

3.2 Resolution (Dots per inch)

This function specifies the resolution (dots per inch) for the main scanning and sub
scanning. Dots per inch (dpi) are used as the resolution unit, and 200 dpi are
equivalent to about 8 pixels per millimeter. When the resolution is increased, the
image becomes clearer but proportionately more memory (disk space) and
processing time are required. The available resolution setting ranges are as follows:
•
S7065C
•
SS905C
IMPORTANT NOTES:
• In the MultiStream (Binary&Gray or Binary&Color) mode, the Color or Gray Image
Resolution can be set to a ratio of 1/1, 1/2, 1/3 or 1/4 of the Black and White
resolution. However, the color resolution cannot be set outside the 100 to 400 dpi
range with the
For more details on the MultiStream mode, refer to
• The MultiStream (Binary&Gray or Binary&Color) mode cannot be used by the
TWAIN driver.
ISIS configuration method
1 Select the resolution from the [Dots per inch] list box in the [ISIS] dialog box.
2 To specify a resolution which is not on the list, input the desired value directly
100 to 600 dpi in 1 dpi increments
100 to 600 dpi in 1 dpi increments (Black and White, grayscale)
100 to 400 dpi in 1 dpi increments (Color)
or outside the 100 to 600 dpi range with the
SS905C
into the [Dots per inch] list box.
23
S7065C SS905C
S7065C
Image Type in 3.4.
.