Scanning Area - Panasonic KV-S7065C Reference Manual

3.6 Scanning Area

This function scans a parts of the images of documents. The scanning area is
specified by the start position (X: horizontal; Y: vertical) from the top left corner of the
paper, the image width and the length.
IMPORTANT NOTES:
• The scanning area function cannot be used at the same time as Automatic Crop,
Deskew, Margin, Detect Paper Width, Control sheet, Length Control or Long
Paper.
• In the case of duplex scanning, only X can be set separately for the front and back.
ISIS configuration method
1 In the [Area] section of the [Scan Area] dialog box, set the scanning area on the
Paper
basis of the size which was specified in
Unit Specify centimeters, inches or pixels as the image length unit.
X Position from the left edge of the paper to the left edge of the
scanning area
Y Position from the top edge of the paper to the top edge of the
scanning area
Width Width of the scanning area
What is scanned
Page Size in
37
S7065C SS905C
3.1.