Table of Contents
Advertisement
Step 11:
The siren will sound and the Main Unit will display 06 & DOOR as it sends a
signal to the Monitoring Station. Press "DISARM" button on the Remote
Control to cancel the alarm and the LCD screen will display DISARM.
Step 12:
While the Main Unit is disarmed, press the button on your Medical Alert
Pendant. The Main Unit's LCD screen will display 08 &EMERGENCY while it
sends a medical help signal to the Monitoring Station. Cancel the signal by
pressing "DISARM" button on your Remote Control. The siren will not go off
in the case of medical emergency.
Step 13:
Press "PANIC" button on your Remote Control. The Main Unit's LCD screen
will display 00 & PANIC. Press "DISARM" to cancel. The siren will NOT sound
when the "PANIC" button is pressed.
Step 14:
Disconnect the phone line. The Main Unit will start beeping. Reconnect the
phone cable and the beeping will stop.
Step 15:
Arm the Main Unit by pressing "ARM" on the Remote Control.
Step 16:
Disconnect the phone cable and the siren will go off 5 seconds later. Press
"DISARM" on the Remote Control and the siren will stop.
Step 17:
While the Main Unit is disarmed, open the battery compartment of either PIR
Zone 1 or 2. The Main Unit's LCD screen will display TAMPER and the siren
will sound. Press "DISARM" button on the Remote Control to cancel the alarm.
12
INSTALLATION GUIDE
Main Unit Installation
Please refer to the "Quick Setup Guide" section before proceeding.
The optimum location for your Main Unit is somewhere central to all wireless
transmitters. The system requires a power socket and telephone line so this
usually dictates the location.
Keep the Main Unit out of children's reach.
PIR
PIR
If you have a cordless phone in addition to the Doss Alarmfone,
simply connect that phone's cable to the jack marked "EXT" on the
back of the Main Unit. Do not use double line jacks or line splitters as
they will interfere with your alarm function.
EXTERNAL
SIREN
OUTPUT
EXTENSION PHONE
Note: The batteries in the Main Unit are for backup power only (should power
be cut to your Main Unit).
The LCD screen will display a low battery symbol when batteries need
to be replaced.
PIR
Main unit
PIR
EXTERNAL
SIREN
OUTPUT
DO NOT SPLIT THE LINE£
EXTENSION PHONE
13
Advertisement
Table of Contents
