Zones - Doss WDA-KIT ALARMFONE User Manual

The term "Zone" in used in the security alarm field to determine the specific
part of your premises that an alarm has been triggered. A collection of sens-
ors at least one - securing a specific location is called a zone (e.g., all the
sensors in the living room can be a zone). A complete installation of this
security system can comprise of a maximum of ten zones. The zone number
tells the Monitoring Station the precise location of an alarm that has been
triggered at your premises.
The Doss Alarmfone security system has 10 zones.
Zone No. Assigned to
0 Remote Controls
1
2
3
4
5
6 Door Gap
7 Door Gap
8 Medical Pendant
9 Gas Detectorr
10 Smoke Detector
For example, if you have a double story house you could plan your 'zone'
security system as follows, via:
Ground Level
ZONE NO.
ZONE 1 Kitchen + Main Sitting Area
ZONE 3 Main
ZONE 6 Ground Level Doors & Windows
First Floor
ZONE NO.
ZONE 4
Master Bed Room
ZONE 5
Guest Room
ZONE 7
First Floor Windows & Doors

ZONES

Maximum No.
of Devices
10
PIR 10
PIR 10
PIR 10
PIR 10
PIR 10
10
10
10
10
10
Area Device
PIR
Entry Area PIR
Door Gap
Area Device
PIR
PIR
Door Gap
65
Second Floor
ZONE NO. Area
ZONE 2
Kids Bed Room
Smoke & Gas Detectors
ZONE NO. Area
ZONE 10
Ground Level & First Floor
ZONE 5 (PIR)
ZONE 4 (PIR)
SMOKING ALARM
ZONE 1 (PIR)
ZONE 1 (PIR)
Device
PIR
Device
Smoke Detector
ZONE 2 (PIR)
ZONE 7 (DG)
SMOKING ALARM
ZONE 3 (PIR)
ZONE 6 (DG)
SIREN
SMOKING ALARM
66