Arming And Disarming - Doss WDA-KIT ALARMFONE User Manual

Step 3:
The LCD screen will display the zone status. To change the status to NO or
YES options, press the "UP/DOWN" buttons. To save the changes press the
"#" key.
12:30
Mon
2
CL EA R
Note: The number appearing in the middle of the LCD display shows how
many devices are registered in that zone. If the number is a 0, there
are no devices registered in that zone and you will not be able to
change the zone status.
Step 4:
When you press the "#" key the LCD screen automatically shows the next
zone. Press the "UP/DOWN" buttons to select the desired zones or stop the
process and exit the menu by pressing the "*" key.
12:30
Mon
Z ONE 2
STEP 1
REGISTER NEW
ZONE 1
PARTIAL
ZONE 2
CLEAR ZONE
ZONE 3
BASE NO.
ZONE 4
DEL BASE NO.
ZONE 5
DELAY TIME
ZONE 6
SIREN TIME
ZONE 7
STATUS TO BASE
ZONE 8
CHANGE PSW
ZONE 9
PIR LOW POWER
ZONE 10
10 04
06
PM DISARM
NO
10 04
06
PM DISARM
STEP 2
CLEAR YES
CLEAR NO
Press*key to exit
45

ARMING AND DISARMING

The Doss Alarmfone can be armed and disarmed via Remote Control
or directly from the telephone key pad. You can also arm and disarm
the security system from a remote location.
Arm via Remote Control:
Press and hold the "ARM" key on the Remote Control for
one second.
Disarm via Remote Control:
Press and hold the "DISARM" key on the Remote Control
for one second.
Partially Arming via Remote Control:
Press and hold the "PARTIAL" key on the Remote Control
for one second.
Partially disarming via Remote Control:
Press and hold the "DISARM" key on the Remote Control
for one second.
Arm and Disarm via Keypad:
Press the "ARM/DIS" button on the
Main Unit and enter your four digit
password. (Default password 1234) The
delay time for you to leave the premises
can be set to either two or four minutes.
46