Partial Alarm Function - Doss WDA-KIT ALARMFONE User Manual

Partial Alarm Function

Also known as "bypass", this function is designed for higher security so you
can keep some zones armed while you are at home. For example, if you sleep
upstairs you might wish to have the downstairs security system armed over
night.
1 REGISTER NEW
2 PARTIAL
3 CLEAR ZONE
4 BASE NO.
5 DEL BASE NO.
6 DELAY TIME
7 SIREN TIME
8 STATUS TO BASE
9 CHANGE PSW
10 PIR LOW POWER
Step 1:
Press the "SETUP" button and enter your four digit password. Press the
"DOWN" key once and the LCD screen will display PARTIAL menu. Press the
"#" key to select this option.
12:30
Mon
PARTI AL
Step 2:
Choose the device for partial arming by pressing "UP/DOWN" buttons. To
select the device type press "#" key.
Mon 12:30
PI R
Step 3:
Choose the zone you wish to arm by pressing the "UP/DOWN" buttons. Select
the zone by pressing the"#" key.
12:30
Mon
Z ONE 1
10 04
06
PM DISARM
10 04 06
PM DISARM
10 04 06
PM DISARM
40
Step 4:
Change the zone status to partial ON or OFF by press the "UP/DOWN"
buttons. To save the status, press the "#" key.
12:30
Mon
ON
Step 5:
Press "*" key to exit the menu.
NOTE: Partial "ON" means the zone will be armed when you press the
"PARTIAL" button on your Remote Control.
REGISTER NEW
PARTIAL
CLEAR ZONE
BASE NO.
DEL BASE NO.
DELAY TIME
SIREN TIME
STATUS TO BASE
STEP 1
CHANGE PSW
PIR
PIR LOW POWER
DOOR
10 04 06
DISARM
PM
STEP 2
ZONE 1 ON
ZONE 2 OFF
ZONE 3
ZONE 4
ZONE 5
Press*key to exit
41