Door Gap Sensor Installation - Doss WDA-KIT ALARMFONE User Manual

Door Gap Sensor Installation

Step 1:
Identify the best location on the door and door frame for the Door Gap
Sensor and Magnet to be installed parallel to each other. The distance between
the parts should not be more than 1.5cm and they must sit flash as shown in
the diagram.
The Magnet should be installed on the opposite side of the Door Gap Sensor's
battery compartment.
Step 2:
Install the Door Gap Sensor on the door frame using two of the provided
screws.
MAGNET
<1.5cm
14
Step 3:
Install Magnet on door using two of the provided screws.
Step 4:
Test the Door Gap Sensor by opening the door. The red LED will flash for one
second indicating it is functioning correctly.
15