Doss WDA-KIT ALARMFONE User Manual page 22

REGISTER NEW
PARTIAL
CLEAR ZONE
BASE NO.
DEL BASE NO.
DELAY TIME
SIREN TIME
STATUS TO BASE
STEP 1
CHANGE PSW
2 MIN
PIR LOW POWER
4 MIN
Note: Delay time only applies to key pad arming. Arming and disarming is
instant when you use your Remote Control.
Press * key to exit
38
PIR Low Power
This option allows you to identify which zones are running low on batteries.
Press the "SETUP" button and enter your four digit password. Press the
"DOWN" button nine times and the LCD screen will display PIR LOW POWER.
1 REGISTER NEW
2 PARTIAL
3 CLEAR ZONE
4 BASE NO.
5 DEL BASE NO.
6 DELAY TIME
7 SIREN TIME
8 STATUS TO BASE
9 CHANGE PSW
10 PIR LOW POWER
Step 1:
Press the "#" key to select the option.
12:30
Mon
PI R L OW POW ER
Step 2:
The LCD screen will display LOW POWER ZONE. Press the "DOWN" button to
see if there are any zones running low on power.
12:30
Mon
1
L OW POW ER Z ONE
Step 3:
Press the "#" key to select the option. The LCD screen will display PIR LOW
POWER.
Mon 12:30
PI R L OW POW ER
Step 4:
To exit the menu press "*" key.
REGISTER NEW
PARTIAL
CLEAR ZONE
BASE NO.
DEL BASE NO.
DELAY TIME
SIREN TIME
STATUS TO BASE
CHANGE PSW
PIR LOW POWER LOW POWER ZONE
10 04 06
PM DISARM
10 04 06
DISARM
PM
10 04 06
PM DISARM
STEP 1
Press*key to exit
39