Alarm Settings; Change Password - Doss WDA-KIT ALARMFONE User Manual

ALARM SETTINGS

Change Password

Note: You must change the default password (1234) when you
up your Doss Alarmfone for the first time.
set-
To set up your alarm function press the "SETUP" button on your Main Unit
without lifting the handset. The LCD screen will display PASSWORD:.
Mon 12:30
PAS SW ORD:
Enter the four digit default password 1234 and then press the "#" key. The
LCD screen will display the menu options.
1 REGISTER NEW
2 PARTIAL
3 CLEAR ZONE
4 BASE NO.
5 DEL BASE NO.
6 DELAY TIME
7 SIREN TIME
8 STATUS TO BASE
9 CHANGE PSW
10 PIR LOW POWER
Scroll down through the menu using the "DOWN" button until you see
CHANGE PSW on LCD screen.
1 REGISTER NEW
2 PARTIAL
3 CLEAR ZONE
4 BASE NO.
5 DEL BASE NO.
6 DELAY TIME
7 SIREN TIME
8 STATUS TO BASE
9 CHANGE PSW
10 PIR LOW POWER
10 04 06
PM DISARM
26
Step 1:
Press the "#" key to select CHANGE PSW option.
Mon 12:30
CHANGE
step 2:
The LCD screen will display PASSWORD:. Enter your new four digit password
and then press the "SAVE" button on the top right hand side of the Main Unit.
12:30
Mon
PAS SW ORD:
Step 3:
Press the "*" key to exit the menu.
REGISTER NEW
PARTIAL
CLEAR ZONE
BASE NO.
DEL BASE NO.
DELAY TIME
SIREN TIME
STATUS TO BASE
CHANGE PSW
STEP 1
PIR LOW POWER
PASSWORD:
10 04 06
PM DISARM
PS W
10 04
06
PM DISARM
Press*key to exit
27