Doss WDA-KIT ALARMFONE User Manual page 27

Wireless security system for home and small business
Table of Contents

Advertisement

Partial Arming via Keypad:
Press the "PARTIAL" button on your Main Unit and then enter your four digit
password.
Partial Disarming via Keypad:
Press the "ARM/DIS" button on your Main Unit and enter your four digit
password.
Panic:
To activate a panic alarm, press and hold the "PANIC" key
on your Remote Control for one second.
Medical Emergency:
To activate a medical alarm, press and hold the button on
your Medical Alert Pendant for one second.
Arming and Disarming from A Remote Location:
To arm and disarm your Doss Alarmfone from a remote location, call
the Doss Alarmfone number.
1
2
3
4
5
6
7
8
9
0
#
00:00
00 00
Mon
00
PM
DISARM
REMOTE CONTROL
47
Step 1:
The alarm unit will answer after nine ring tones and the caller will hear two
beeps.
Step 2:
Input your four digit password using the telephone keypad. If the password
is correct the caller will hear one beep. REMOTE CONTROL will be displayed
on the LCD screen of the Main Unit and the system goes into Remote Control
mode.
If the password is incorrect, the caller will hear four short beeps. You may try
again but you may only make three attempts in total.
Step 3:
To arm the security system press the " " button on your telephone keypad.
The Main Unit will beep once to indicate it is armed. To disarm press the "3"
button on your keypad and the unit will beep twice to indicate it is disarmed.
You can also "spot listen-in" for up to 45 seconds to see if there's anything
going on in your house. Press "1" for this function.
Step 4:
To log out simply hang up.
2
48

Advertisement

Table of Contents
loading

Related Products for Doss WDA-KIT ALARMFONE

Table of Contents