Delay Time; Pir Low Power - Doss WDA-KIT ALARMFONE User Manual

Step 5:
Press the "DEL" button to delete the second number.
Repeat these steps for deleting "TEL 3-TEL 9" numbers.
Step 6:
Press "*" key to exit the menu.
REGISTER NEW
PARTIAL
CLEAR ZONE
BASE NO.
DEL BASE NO.

DELAY TIME

SIREN TIME
STATUS TO BASE STEP 1
CHANGE PSW MONITOR STATIO

PIR LOW POWER

SELF MONITOR
STEP 2
TEL 1
TEL 2
TEL 3
TEL 4
TEL 5
TEL 6
TEL 7
TEL 8
TEL 9
Press *key to exit
36
Delay Time
The delay time option is used for key pad arming when you are not using
your Remote Control. Delay time is the time you need to leave your premises.
Press the "SETUP" button and enter your four digit password. Press the
"DOWN" button five times and the LCD screen will display DELAY TIME.
1 REGISTER NEW
2 PARTIAL
3 CLEAR ZONE
4 BASE NO.
5 DEL BASE NO.
6 DELAY TIME
7 SIREN TIME
8 STATUS TO BASE
9 CHANGE PSW
10 PIR LOW POWER
Step 1:
Press the "#" key to select the DELAY TIME option.
Mon 12:30
DEL AY T I M E
Step 2:
The LCD screen will display 2 MIN. To choose the other option of 4 MIN press
"UP/DOWN" buttons. Press the "#" key to select.
Mon 12:30
2 M I N
Step 3:
Once you have pressed the "#" key the unit will save the chosen time of
either two or four minutes and return to the menu.
12:30
Mon
DEL AY T I M E
Step 4:
Press the "*" key to exit the menu.
10 04 06
PM DISARM
10 04 06
PM DISARM
10 04 06
PM DISARM
37