Equipment Summary - Doss WDA-KIT ALARMFONE User Manual

2 x Remote Control Medical Alert Pendant
These premises are protected by
8 x Wall Plugs 2 x Security Stickers
CIONYX PTY. LTD.
REPAIR AND WARRANTY Limited Warranty
SERIAL NO.:
Thank you for selecting a Cionyx value for money product.
Cionyx Pty Ltd warrants this Product free from defects in material and workman ship for one year from date of purchase.
ALARM ID NO.:
Within this warranty period Cionyx Pty Ltd will repair or replace defective parts and / or accessories at no charge, provided
the Product is returned with proof of purchase (original invoice).
The buyer assumes all responsibility for proper selection, installation and maintenance. This warranty is invalid in any case
MONITORING STATION 1:
that the Product unit (body) is opened, modified or serviced by an unauthorized service firm.
Any replacement or repaired Product will be warranted from the moment of replacement or repair for the unused remainder
0800-604-560
of the original warranty period or 90 days, whichever is the longer.
This warranty is void to the extent that failure of the Product results from modification, accident, abuse, misapplication or any
MONITORING STATION 2:
failure to observe instructions in the accompanying documentation (User's Manual) regarding proper unpacking, installation,
maintenance and/or service of the Product. 0800-604-567
Please refer and read to the enclosed 'SwapTech Replacement Guarantee' which ensures your satisfaction with this product.
If you have any questions /Queries please ring our Help Desk any time at your convenience.
Copyright 2007 Cionyx Pty. Ltd.
Please register your 'SwapTech' warranty immediately and receive 12 months free operational support by
www.fortknoxsecure.com
ringing the Help Desk now (Australia: 1300 736 963 /New Zealand: 0800 200 318 )
PLEASE CHANGE YOUR PASSWORD BEFORE USIN G THE UNIT
Warranty Cards
User Manual
(Cionyx and "SwapTech")
*6 x AA batteries not included " "
#4 x "AAA" batteries not included

Equipment Summary

Main Unit
The Main Unit acts as both a normal telephone for
everyday calls and your alarm panel. It sends the
alert to the Monitoring Station via the telephone line
when the alarm is triggered.
PIR (Passive Infra-Red) Sensor
The PIR detects human movement by rapid changes in
temperature and motion. When movement is detected
the PIR sends a signal to the Main Unit triggering the
alarm. To avoid false alarms do not install sensors pointing
to areas of high temperature fluctuations or areas known
to have motion.
8 x Screws
WARNING
NZ
Security Services Forms
2
Door Gap Sensor
The Door Gap Sensor is a surface mounted magnet and
reed switch. The Door Gap Reed Switch is mounted on
the door frame and the magnet parallel on the edge of
the door so the two parts sit neatly together when the
door is closed. When the security system is armed and
the door is opened, indicating forced entry, the change
in proximity of the reed switch to the magnet changes
and the sensor sends a signal to the Main Unit triggering the alarm. The
Door Gap Sensor can also be used on windows to notify the Main Unit when
a window is forced open.
Remote Control
The handy Remote Control can be used to conveniently
arm and disarm the security system remotely. The"PANIC"
button on the Remote Control when activated, whether the
alarm is on or off, sends specific codes via the Main Unit to
your Monitoring Station. The Monitoring Station recognises
the 'panic code' and the operator responds according to
your instructions (e.g., notifies the police).
Medical Alert Pendant
The Medical Alert Pendant is for medical emergencies. Upon
activation, whether the alarm is armed or not, the security
system sends specific codes to your Monitoring Station.
The Monitoring Station recognises the medical emergency
by the codes and the operator responds to the situation
according to your instructions (e.g., notifies the ambulance
service).
3