Speco O2D10 Owner's Manual page 15

Note:
• If the difference of value between the [Day >> Night]
and [Night >> Day] is not big enough, there may be a
problem to convert between the Day and Night modes.
• When the [AGC] set to [Off ], the [Day/Night] is initialized
to the [Day] mode. Other settings of [AGC] are initialized
to the [Auto] mode.
• Default: Click this button to restore back to original factory
settings.
Operation and settings
SmartIR
> Mode
- Auto: When the [Day/Night] menu set to [Night]
mode, the brightness of the IR LED will be adjusted
automatically. The [Max Level] is displayed.
- Manual: When the [Day/Night] menu set to [Night]
mode, the brightness of the IR LED will be fixed.
- Off: When the [Day/Night] menu set to [Night] mode, IR
LED will be turned off.
> Max Level: If the [Mode] option set to [Auto], the maximum
brightness of IR LED can be adjusted.
Note:
When [IRIS] set to [Manual], the [Auto] mode is deactivated.
> Level: If the [Mode] option set to [Manual], the fixed
brightness of IR LED can be set.
• Default: Click this button to restore back to original factory
settings.
15