Hamamatsu Photonics C9300-201 Instruction Manual page 3

C9300-201 Ver.1.2
Power Supply
Use the camera with the voltage indicated on the rating. Using a
different voltage can damage the camera and lead to fire or electric
shock.
Cables
Be careful not to place heavy objects on cables or bend it excessively.
Doing so can damage the cable and lead to fire or electric shock.
Do not attempt to dismantle or modify the camera
Doing so can also lead to damage and even injury, as some internal
components become very hot. Only touch parts as indicated in this
manual.
Do not allow foreign objects such as combustible substances,
metal objects or water to get inside the camera. They can damage the
camera and lead to fire or electric shock.
If an abnormality occurs,
such as the image suddenly disappearing or a strange noise, smell or
see smoke coming from the camera, turn the power off immediately and
contact Hamamatsu subsidiary or local distributor. In case the repair is
needed, it should be always treated at Hamamatsu side.
2H
WARNING
AMAMATSU PHOTONICS K.K.