Troubleshooting Checklist; Image Not Transferred; Although Images Are Transferred - Hamamatsu Photonics C9300-201 Instruction Manual

C9300-201 Ver.1.2

13. TROUBLESHOOTING CHECKLIST

If an abnormality occurs, look up the possible causes in the following tables and, if
necessary, report the details to Hamamatsu subsidiary or local distributor.

13-1 IMAGE NOT TRANSFERRED

Cables not fully connected.
Camera control register not correctly configured.
Short in cables.

13-2 ALTHOUGH IMAGES ARE TRANSFERRED

(1) Scratches or discoloration visible on the screen
Dirty the lens
Front grass of camera dirty.
(2) Image is blurred.
Incorrect back focus.
Dirty the CCD chip.
(3) Only dark, shaded images output.
Lens mount cap left on.
(4) All image overflowing.
Too much light.
Contrast enhancement set too high.
(5) Noise in image
Noise introduced from exterior.
Poor connection of internal components.
Bad circuitry.
38H
Cause
Cause
Cause
Cause
Cause
Cause
AMAMATSU PHOTONICS K.K.
Measures
Reconnect.
Recheck register settings.
Replace cables.
Measures
Wipe the lens.
Wipe with gauze dampened with alcohol.
Measures
Contact Hamamatsu subsidiary or
distributor.
Measures
Remove the cap.
Measures
Reduce amount of light.
Lower gain.
Measures
Find and remedy problem.
Contact Hamamatsu subsidiary or
distributor.
Chapter
7
Chapter
Chapter
17
Chapter
Chapter
Chapter
17