Table of Contents
Advertisement
10-6 DETAIL OF COMMANDS
(1) Mode setting commands
AMD
(Acquire MoDe)
Parameter N (Normal)/E (External)
Function
Example
NMD
(Normal MoDe)
Parameter N (Normal)/S (Shutter)/T (Time)
Function
Example
EMD
(External MoDe)
Parameter
Function
Example
SMD
(Scan MoDe)
Parameter N (Normal)/S (Super pixel)/A (Sub-array)/L (Line scan)
Function
Example
Selects Free running mode or External control mode for the CCD
exposure start timing.
Image acquisition is started in Free running mode.
AMD N
Image acquisition is started in External control mode.
AMD E
Selects mode used to set the exposure time when the exposure
timing is controlled internally.
Exposure time is normal readout time at each mode.
NMD N
Exposure time is set with the SHT command.
NMD S
Exposure time is set with the AET command.
NMD T
E (Edge)/L (Level)/T (Time)/S (Synchronous readout)/
F (Fast repetition)
Selects mode used to set the exposure time when the exposure
timing is controlled External control mode.
Exposure time is set internally with the EST command.
EMD E
Exposure time is set externally according to external
EMD L
trigger level.
Exposure time is set internally with the AET command.
EMD T
Readout time is set externally according to external
EMD S
trigger cycle.
This mode is special fast repetition mode.
EMD F
Please see section 9-3-5 in detail.
Selects Normal readout, Binning (super pixel) readout, Sub-array
readout or Line scan readout.
The data is readout using Normal readout.
SMD N
The data is readout using Binning (super pixel) readout.
SMD S
The data is readout using Sub-array readout.
SMD A
The data is readout using Line scan readout.
SMD L
HAMAMATSU PHOTONICS K.K.
C9300-201 Ver.1.2
31
Advertisement
Table of Contents
