Table of Contents
Advertisement
14. SPCIFICATIONS
14-1 CAMERA SPECIFICATIONS
(1) Electrical specifications
Imaging device
Effective number of pixels
Cell size
Effective area
Frame rate
Readout noise
A/D converter
Lens mount
Amp gain conversion factor
Full well capacity
Contrast enhancement
Exposure time setting
(2) Operating environment
Ambient storage temperature
Ambient operation temperature
Ambient operating humidity
Operating space
(3) Dimensional outlines and weight
Camera
Note
(4) Applicable standards
EMC
*1
This value is the measurement in free running mode and scan mode [normal readout]. The value was measured with the CCD in dark
state. In this state, two images are acquired, image subtraction performed, the standard deviation taken from the results, and this
value was then squired and plugged into a transformation coefficient.
*2
When running an amp-gain transformation coefficient to convert measured image count values into electrons, be sure to conduct dark
subtraction first. The conversion efficiency is the value at the linearity correction ON.
Normal readout
2×2 binning readout
4×4 binning readout
8×8 binning readout
*2
-10 ºC to + 50 ºC
70 % or less (no condensation)
Indoor, altitude up to 2 000 m
Approx. 0.73 kg
(not including cables and accessories)
•
Please see Chapter 15 Dimensional outlines.
EN61326: 1997 + A1: 1998 + A2: 2001 + A3: 2003
HAMAMATSU PHOTONICS K.K.
Progressive scan interline CCD
640 (H) × 480 (V)
7.4 µm × 7.4 µm
4.73 mm × 3.55 mm
Single
82.0 Hz
Dual
150.6 Hz
Single
155.5 Hz
Dual
274.2 Hz
Single
280.7 Hz
Dual
461.7 Hz
Single
465.0 Hz
Dual
694.2 Hz
20 electrons (typ.)
12 bit
C-mount
5.0 electrons /ADcounts
20 000 electrons
0 dB to 14 dB (16 step)
33.1 µs to 1 s
0 ºC to + 40 ºC
C9300-201 Ver.1.2
(Square size)
*1
Class A
39
Advertisement
Table of Contents
