C9300-201 Ver.1.2
2. CHECK THE CONTENTS OF PACKAGE
When you open the package, check that the following items are included before use. If the
contents are incorrect, insufficient or damaged in any way, contact Hamamatsu subsidiary
or local distributor without attempting to operate the camera.
Digital CCD camera
Lens mount cap
C9300-201 instruction manual (this booklet)
[Option]
AC adapter (Accessories: Power supply cord)
Camera cable
CameraLink interface cable
•
Note
3. INSTALLATION
Do not use or store the camera these locations.
•
Where the ambient temperature may fall below 0 °C or rise above 40 °C
•
Where the temperature fluctuates sharply
•
In direct sunlight, or near a source of heat
•
Where the humidity exceeds 70 %, or where it is exposed to water
•
Near sources generating strong magnetic or electrical fields
•
Where there is vibration
•
Where it comes in contact with corrosive gases (chlorine, fluorine, etc.)
•
Dusty locations
4H
(attached to the camera)
The cable listed in option is highly recommended for use with the camera.
The camera system may not confirm to CE marking regulation if other
type of cable is used with.
AMAMATSU PHOTONICS K.K.
1
1
1
A3472-06
A3194-00 (2 m)
A3194-01 (5 m)
A3194-02 (10 m)
A3194-03 (25 m)
A9262-05 (5 m)
A9262-10 (10 m)