\ \
System Management
you can check, update or reset the system information.
1.
From <MEnU> - <SySTEM SETUP> - <SySTEM>, select
<SySTEM MAnAgEMEnT>.
2.
Use the [▲▼◀▶/EnTER] buttons on the remote control
or use the mouse to set each option of the system
management.
i FW UPDATE : Via USB you can update the current
firmware with the latest version.
i FACTORy DEFAULT : Return the DVR settings to
the factory default.
•
if you proceed with the firmware upgrade or select to reset
to the factory default, all current settings of the DVR will be
erased. in such a case, you must configure the network,
time and recording settings again.
i SySTEM DATA : Save the system settings or get
the system information from other device.
- SAVE : Store the DVR settings to a USB storage
device.
- LOAD : Apply the settings of the USB storage
device to the DVR.
i PASSWORD : The DVR will prompt the user for a
password when accessing any of the menus: log
out, system settings, record settings, backup, and
search.
•
if it is set to <Off>, note that the ADMin account is only
effective and access to all menus will be restricted.
i ExPiRED TERM OF PASSWORD : you will be
prompted to change the current password after a
certain period of time.
i AUTO LOgOUT : if there is no user input for a
certain period of time, you can set the DVR to log out automatically.
i WAiT TiME : Specify the waiting time for Auto Logout.
3.
When done, press the [ExiT] button on the remote control or click <CLOSE> in the lower screen to return to the
previous menu.
77