System Management - Vitek VT-SRL User Manual

\ \

System Management

you can check, update or reset the system information.
1.
From <SySTEM SETUP> - <SySTEM>, select <SySTEM
MAnAGEMEnT>.
2.
Use the [▲▼◀▶/EnTER] buttons on the remote control
or use the mouse to set each option of the system
management.
i Fw UPDATE : you can update the current firmware
with the latest version.
i FACTORy DEFAULT : Return the DVR settings to
the factory default.
•
If you proceed with the firmware upgrade or select to reset
to the factory default, all current settings of the DVR will be
erased. In such a case, you must configure the network,
time and recording settings again.
i SySTEM DATA : Save the system settings or get
the system information from other device.
- SAVE : Store the DVR settings to a USB storage
device.
- LOAD : Apply the settings of the USB storage
device to the DVR.
i PASSwORD : The DVR will prompt the user for a
password when accessing any of the menus: quit,
system settings, record settings, backup, and
search.
•
If it is set to <Off>, note that the ADMIn account is only
effective and access to all menus will be restricted.
i EXPIRED TERM OF PASSwORD : you will be
prompted to change the current password after a
certain period of time.
i AUTO LOGOUT : If there is no user input for a
certain period of time, you can set the DVR to log out automatically.
i wAIT TIME : Specify the waiting time for Auto Logout.
3.
when done, press the [EXIT] button on the remote control or click <CLOSE> in the lower screen to return to the
previous menu.
47