SYSTEM : SYSTEM MANAGEMENT
SYSTEM INFORMATION: User can see the system information as below.
F/W version : Shows the firmware version of the DVR.
H/W version : Shows the hardware version of the DVR.
VIDEO SIGNAL TYPE : The DVR automatically switches between PAL and NTSC depending on the
DISK CAPACITY : The first value shows the amount of hard drive capacity used by recorded footage, t
he
IP ADDRESS : Shows either the manual IP address entered in NETWORK setup or the IP address
MAC ADDRESS : Shows the MAC (Media Access Control) address of the DVR. It is unique – no other
DDNS DOMAIN NAME: If DDNS is enabled, the host DDNS server is specified here.
NET CLIENT PORT : The port number that the DVR uses to support remote connection from the client
WEB SERVER PORT : The port number that the DVR uses to support remote connection from Internet
channel 1 input signal at power on.
second value shows the total hard drive capacity installed.
assigned by a DHCP server if enabled.
network device has this MAC address.
software.
Explorer or other web browsers.
Click the
u.
26
SYSTEM MANAGEMENT
men