Assembly; Ii Assembly - Nikon SMZ1000 Instruction Manual

II

Assembly

☞
• An equipment model name in the bold-faced brackets [ ] indicates
that the following description is exclusively for that model.
[C-PS160]
1
Attach the pillar to the stand.
Insert the pillar straight into the stand with the
groove of the pillar located down as far as the
pillar reaches to the bottom. Clamp the pillar
using the clamp tool.
Place the stand on the level surface.
2
Mount the stage plate.
3
[C-PS160]
Fit the stage plate into the stand base. Tighten
the stage plate camp screw using the clamp
tool to fix the stage plate.
[C-PS & C-PSC]
Fit the stage plate into the stand base while
pushing it against the rim in the direction
shown by the arrow in the illustration.
[C-PS160]
4
Fix the C-FMC focusing mount to the
pillar.
Face the focusing mount to the front and
tighten the focusing mount clamp screw.
Note) When fixing the focusing mount to the
upper part of the pillar, securely
tighten the clamp screw so as not to
fall the focusing mount.
12
Pillar
Groove