Nikon SMZ1000 Instruction Manual page 11

C-FMC Focusing mount
Screw hole for mounting
an Epi-arm for halogen
illuminator
Located on both sides
of the focusing mount.
Holds the G-EIA
flexible arm or Epi-arm.
Screw hole for
mounting accessories
Located on both sides
of the stand base. M5
Zooming knob clicks ON/OFF
screw (inside)
Refer to "ON/OFF of the Zooming
Knob Clicks" on p.17.
Clamp tool
Used for the stage plate clamp
screw, eyepiece tube clamp
screw, etc. Same size as the
small hexagonal wrench
supplied with the zooming body.
Stored in the top of the pillar.
Pillar
Torque adjustment ring
(Innermost ring)
Adjusts the torque of the
focus knob. (Refer to
"Adjust the focus knob
torque" on p.15.)
Focusing mount
clamp screw
Fixes the focusing mount
to the pillar.
Pillar clamp screw
(Inside)
I
9