Nikon SMZ1000 Instruction Manual page 28

2 Epi arm
Slightly loosen the clamp knob on the
arm. Screw in the mounting screw at
the end of the Epi arm into the screw
hole of the stand (screw hole for
mounting an Epi-arm) while turning the
joint. Next, securely tighten the nut
using the supplied wrench.
Epi arm may be attached also to the
screw hole for mounting accessories of
C-PS160.
Screw the mounting screw at the other
end of the Epi arm into the screw hole
on the lamp house in the same manner
as described above. Set the lamp house
in a position that makes for easy
viewing and tighten the clamp knob.
26
Clamp knob
Simultaneously
clamps two
arms/joints.
Arm
Joint
Spanner
Nut
Mounting
screw