I Nomenclature - Nikon SMZ1000 Instruction Manual

I
Nomenclature
The figures on p.8 & 9 show a SMZ1000 zooming body, with P-BT
binocular eyepiece tube, C-W 10X eyepieces, Plan Apo 1X objective,
C-FMC focusing mount, and C-PS160 plain stand.
Diopter ring
Refer to "Adjust the
diopter" on p.16.
Eyepieces
10X, 15X, 20X and
30X eyepieces are
available.
Eyepiece tube
clamp screw
Zooming body
clamp screw
Fixes the zooming body
to the focusing mount.
Zooming body
Outside diameter of the
part to be mounted the
focusing mount: ø76
Objective
Plan 1X, Achro 0.5X,
Plan 1X ERGO, Plan
Apo 0.5X, Plan Apo 1X,
ED Plan 1.5X and ED
Plan 2X objectives are
available. HR Plan Apo
series objectives for
SMZ1500 can be used
also, but the magnifi-
cation in this case
becomes 1.25 times the
magnification indicated
on the objective itself.
Refer to Table 1 on p.36.
Groove for mounting
accessories
Holds the Fluorescent
ring illuminator, Fiber
optic ring illuminator
and the like. Outside
diameter: ø60
Stage plate clamp
screw
Fixes the stage plate
to the stand base.
8
Eyepiece sleeve
P-BT Binocular
eyepiece tube
P-BTL low eye-level
eyepiece tube and P-
BERG tilted eyepiece
tube are also
available.
Zooming knob
Changes the
magnification of the
sample image. Refer
to "Zoom" on p.17.
Coarse focus knob
Refer to "Focusing"
on p.16.
Fine focus knob
Refer to "Focusing"
on p.16.
Stand
C-PS160 Stand base
Various stands are
available.
Screw for mounting
accessories
Holds the 1/4 lambda
plate and the like.
The screw on the
inside diameter:
M55 × 0.75
Stage plate
The black or the
white side can be
chosen according to
the sample.