Documentation - Multitech SocketModem Cell HSPA+ MTSMC-H5 Series Device Manual

Notes:

These units ship without network activation. To connect them to the cellular network, you need a cellular
account. For more information, refer to Account Activation for Cellular Devices in the Universal Socket
Developer's Guide.

GP devices have a dedicated GPS receiver.

MI devices have multiple interfaces.

The complete product code may end in .Rx. For example, MTSMC-H5.Rx, where R is revision and x is the revision
number.

All builds can be ordered individually or in 50-packs.

Documentation

The following documentation is available by email to
Request Form on the multitech.com

Device Guide – This document. Provides model-specific specifications and developer information.

Universal Socket Developer Guide – Provides an overview, safety and regulatory information, design
considerations, schematics, and general device information. (S000342)

USB Driver Installation Guide for H5 and G3 Devices – Provides steps for installing USB drivers. (S000533)

AT Command Guide – Use the following AT Command Guides with HSPA devices:

S000574 for H5-xx.R1 Modems

S000528 for H5-xx Modems (not .R1)

S000457 Universal IP Commands
SocketModem Cell HSPA and SocketModem iCell HSPA MTSMC-H5 Device Guide
oemsales@multitech.com
CHAPTER 1 – DEVICE OVERVIEW
or by using the Developer Guide
6