Setting Up The Display; Attaching The Pen Tray And I/O Box - BenQ RP550+ User Manual

6

Setting up the display

Setting up the display

Attaching the pen tray and I/O box

Before mounting and using the display, please follow the steps below to install the pen
tray and I/O box. The installation should be performed by at least two adult persons to
avoid danger and injuries.
1. Place a clean, dry and lint-free cloth on a flat, horizontal and object-free surface.
Make sure that the size of the cloth is larger than the display.
2. Gently lay the display on the cloth with the LCD screen facing down.
3. Attach the I/O box to the
pen tray using the four
supplied M3 x 6 flat head
screws.
4. Attach the pen tray to
the display using the eight
supplied M3 x 6 round
head screws.
5. Connect the supplied DVI
interface cable to the DVI
interface jacks on the
display and I/O box.
6. Connect the supplied
USB cable to the USB
Type A jack on the
display and the USB Type-
B jack on the I/O box.
M3 x 6 flat head screws
M3 x 6 round head screws