Connection; Connecting Audio/Video Signals - BenQ RP550+ User Manual

16

Connection

Connection

Connecting audio/video signals

Pay attention to the following notes when you connect cables:
• Please turn off all devices.
• Familiarize yourself with the audio/video ports on the display and the devices you want
to use. Be aware that incorrect connections may adversely affect picture quality.
• Do not remove cables from the ports by pulling the cable itself. Always grasp and pull
the connectors at the end of the cable.
• Ensure that all cables are fully inserted and firmly seated.
Connecting the VGA input
1. Connect the VGA IN jack on the display to the VGA output jack on a computer
using a D-Sub (15-pin) cable.
2. Connect the computer's audio output jack to the AUDIO IN (AUDIO1) jack on the
display using a suitable audio cable.
3. To view images from this input, press the VGA button on the remote control. To
select an appropriate audio source, see
MULTI-MEDIA
RJ-45
USB USB Type A
Mini-B
The audio cable is not supplied and should be purchased separately.
RS-232C
OUT
IN
DP HDMI
D-Sub (15-pin) cable
Audio Source on page 35
VIDEO IN AV VGA AUDIO IN AUDIO IN
AUDIO 1 AUDIO 2
Pb Y
OUT
OUT
S-VIDEO
Pr
IN
IN
Computer
for details.
AUDIO OUT USB TYPE B FOR TOUCH AC SWITCH
ON/OFF
L
R
Audio cable
100-240V~50-60Hz
3.4A 1.7A
IN OUT