Basic Operations; Turning The Display On Or Off; Locking/Unlocking The Controls; Switching Input Signals - BenQ RP550+ User Manual

Basic operations

Turning the display on or off

To turn on or off the display, press the power button on the
display's control panel or on the remote control.
• The display's standby mode still consumes power. To completely cut off power supply, set the
power switch to the off position or disconnect the power cord from the power outlet.
• The display follows the VESA approved DPM Power Management function. The power
management function is an energy saving feature that automatically reduces the display's power
consumption when the keyboard or the mouse has not been used for a fixed period.

Locking/unlocking the controls

You can lock/unlock the control panel to prevent unwanted or accidental operations.
• Control panel buttons
To lock/unlock the control panel buttons, press and hold
panel simultaneously for 5 seconds. Once locked, the control panel buttons do not
function unless unlocked.
• Remote control (IR) functions
To lock/unlock the remote control (IR) functions, press and hold MENU and
control panel for 5 seconds. Once locked, the display does not respond to any remote
control operations unless unlocked.
To lock/unlock both the control panel and remote control buttons, press
seconds, and then
remote control buttons do not function unless unlocked.

Switching input signals

Press the INPUT button or those signal selection buttons on the remote control or the
INPUT button on the control panel to select an input signal.

Adjusting audio volume level

Press /- or /+ on the control panel or VOL+/VOL- on the remote control to adjust
the volume.
on the remote control. Once locked, the control panel and
ENTER
Basic operations
/- and /+ on the control
for 5
29
/- on the