Setting Up The Display; Installing The Display On A Wall - BenQ RM6503A User Manual

Table of Contents

Advertisement

6

Setting up the display

Setting up the display
Please pay attention to the following notes during installation:
• This display should be installed by at least two adult persons. Attempting to install this display by
only one person may result in danger and injuries.
• Refer the installation to qualified technicians. Improper installation may cause the display to fall
or malfunction.
• Stability Hazard: The flat panel may fall, causing serious personal injury or death. To prevent
injury, this flat panel must be securely attached to the wall in accordance with the installation
instructions.

Installing the display on a wall

1. Place a clean, dry and lint-free cloth on a flat, horizontal and object-free surface.
Make sure that the size of the cloth is larger than the display.
2. Gently lay the display on the cloth with the LCD screen facing down.
3. Identify the wall mounting screw holes on the back of the display as shown in the
illustration.
B
Dimension
65"
75"
86"
VESA spec. (A x B)
600 x 400 mm
800 x 400 mm
800 x 600 mm
A
Screw type:
M8 x 25L
M8 x 25L
M8 x 25L
Quantity
4
4
4

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rm7503aRm8603a

Table of Contents