Setting Up The Display; Mounting The Display - BenQ RE9801 User Manual

Setting up the display

Mounting the display

You can install the display on a vertical surface with a suitable wall mounting bracket.
Please pay attention to the following notes during installation:
• This display should be installed by at least two adult persons. Attempting to install this
display by only one person may result in danger and injuries.
• Refer the installation to qualified technicians. Improper installation may cause the
display to fall or malfunction.
• Stability Hazard: The flat panel may fall, causing serious personal injury or death. To
prevent injury, this flat panel must be securely attached to the wall in accordance with
the installation instructions.
Installing the display on a wall
1. Place a clean, dry and lint-free cloth on a flat, horizontal and object-free surface.
Make sure that the size of the cloth is larger than the display.
2. Gently lay the display on the cloth with the LCD screen facing down.
3. Remove the desktop stands from the display if installed.
4. Identify the wall mounting screw holes on the back of the display as shown in the
illustration.
RE6501
RE8601
*Screw type: M8*20L
*Screw type: M8*20L
RE7501
RE9801
Setting up the display
*Screw type: M8*20L
*Screw type: M8*20L
11