Table of Contents
Advertisement
POWER ROOF VENT - Bath Area
A push button switch for the vent fan is locat-
ed up on the vent. The vent dome can be raised
and lowered using the crank handle.
SLIDER WINDOWS
Lift the latch handle straight out from the win-
dow. Grasp the sliding window edge frame and
slide the window to the side. Be sure the latch is
raised before trying to slide the window closed.
DAY/NIGHTER PLEATED WINDOW
SHADES
Your coach may feature two-stage pleated
window shades that can be used for daytime or
nighttime privacy.
Sun Filter: The first, lower section is a trans-
lucent white shade that can be lowered for priva-
cy without darkening the inside of the coach. It
can also filter out harsh direct sunlight to help
keep the inside of the coach cool in summer or to
disperse light for houseplants.
Room Darkening/Privacy Shade: The sec-
ond, upper section is an opaque, darkening shade
for nighttime privacy and daytime room darken-
ing purposes. Pull both the first and second sec-
tions down together or separately.
Tension Adjustment:
The tension of the pleated shades can be ad-
justed if they become loose and will not stay up
when raised, or they are too tight and are difficult
to raise and lower.
APPLIANCES & INTERIOR FEATURES
Spool
To tighten the tension, simply wrap the lower
end of the guide cords (on each side of the shade)
a few turns around the spools at the lower corners
of the shades.
To loosen the tension, unwrap the guide cords
from the spools one turn at a time until desired
tension is achieved.
We recommend that you fully raise pleated
shades when they are not needed, to prevent
them from losing their shape.
WINDOW ROLL-UP SHADE
ADJUSTMENT
If a roll-up type window shade in your motor
home does not roll up or down fully, the spring
tension may need adjustment.
Spring Too Weak:
− Roll shade about half-way down on window.
− Remove shade from bracket.
− Roll shade snugly by hand and replace onto
bracket.
Spring Too Strong:
− Roll shade all the way up.
− Remove shade from bracket.
− Unroll shade one or two turns as necessary by
hand and replace onto bracket.
QUARTZ WALL CLOCK
To Replace Battery
The clock is mounted in a socket on the face
of the cabinet.
SECTION 8
Guide Cord
8-23
Advertisement
Table of Contents
