Power Roof Vent; Slider Windows; Pleated Window Shades; Window Roll-Up Shade Adjustment - Winnebago 2004 Itasca Sunstar Owner's Manual

POWER ROOF VENT - Bath Area
Some models are equipped with a powered
roof vent in the bath area. A push button switch
for the vent fan is located up on the vent. The vent
dome can be raised and lowered using the crank
handle.

SLIDER WINDOWS

Lift the latch handle straight out from the win-
dow. Grasp the sliding window edge frame and
slide the window to the side. Be sure the latch is
raised before trying to slide the window closed.
Lift Latch to Open Window
(Be sure handle is also raised when closing)

PLEATED WINDOW SHADES

Your coach may feature pleated window
shades that can be used for daytime or nighttime
privacy.
Tension Adjustment:
The tension of the pleated shades can be ad-
justed if they become loose and will not stay up
when raised, or they are too tight and are difficult
to raise and lower.
To tighten the tension, simply wrap the lower
end of the guide cords (on each side of the shade)
a few turns around the spools at the lower corners
of the shades.
APPLIANCES & INTERIOR FEATURES
To loosen the tension, unwrap the guide cords
from the spools one turn at a time until desired
tension is achieved.
We recommend that you fully raise pleated
shades when they are not needed to prevent them
from losing their shape.
WINDOW ROLL-UP SHADE
ADJUSTMENT
If a roll-up type window shade in your motor
home does not roll up or down fully, the spring
tension may need adjustment.
Spring Too Weak:
- Roll shade about half-way down on window.
- Remove shade from bracket.
- Roll shade snugly by hand and replace onto
bracket.
Spring Too Strong:
- Roll shade all the way up.
- Remove shade from bracket.
- Unroll shade one or two turns as necessary by
hand and replace onto bracket.

QUARTZ WALL CLOCK

To Replace Battery
The clock is mounted in a socket on the face
of the cabinet.
SECTION 8
8-13